Hollow anion-Janus-modified poly(vinylidene fluoride) (PVDF) fiber membranes for nanosized virus removal

In this study, a hollow polyvinylidene fluoride (PVDF) fiber was developed and modified into a Janus membrane (Janus-VM) and an entirely hydrophobic membrane (Hydrophobic-VM) for removing 20-nm-scale viruses during biopharmaceutical processing. The Janus-VM has anionic properties on the outer and feed hydrophilic surfaces, and the inner pore surface (I.P.S) maintains the anionic-hydrophobic properties of the PVDF. Theoretically, an electrostatic repulsion force might be formed between the surface of the strong anionic membrane and anionic bacteriophages, preventing bacteriophages from adsorbing to the membrane surface. As a result, water flux can be increased through the reduction of membrane fouling. The PVDF membrane was modified through UV-irradiation, which causes –OH radicals to form on the membrane surface, and chemical grafting with anionic-hydrophobic/anionic-hydrophilic modifiers, which enhances the membrane's anion characteristics (−27, −48 mV). Additionally, the average pore size was reduced from 34 nm to less than 20 nm through chemical surface modification, after which the Janus membrane showed an excellent initial water flux, with the protein recovery ratio (PRR) approaching 98.9 %. UV absorbance analysis revealed 100 % removal efficiency for 20- and 40-nm gold particles on the membranes. Furthermore, the initial log reduction value (LRV) was observed through flux performance using MS2 and PP7 bacterial phages, for which the Janus membrane showed an excellent virus removal performance (LRV > 6.8 and 6.5).